The only thing I can think is if there is something territory specific to the PR models. I would assume no but you never know. As already stated, at least in the mainland US, you can just put it in gear and drive off assuming you have the FOB with you. What happens when you try this?
The vehicle shuts down , as soon as you apply the brake , or push start button. There is a procedure to Resume the remote start , but I Need more help from someone that solved this issue.
I checked the owners manual, but there's no procedure for my issue. I have a 2017 Nissan maxima sv, and i.t works differently, my remote fob has proximity , ok I start my car using the remote start, I enter the vehicle, Step on the brake pedal and push the start/ stop button and vehicle stays on.
I solved my issue today. In regards to my vehicle shutting down. When you enter vehicle , during smart remote start, ( DO NOT PRESS START/ STOP BUTTON) . As soon as you want to drive or Resume with the remote start active .Here is what you do. APPLY BRAKE PEDAL , PUT SHIFT IN GEAR , RELEASE EMERGENCY BRAKE , MAKE SURE TO HAVE YOUR SEAT BELT BUCKLED. THIS SOLVED MY ISSUE TODAY. 08/02/2021. THANKS FOR YOUR REPLYS.
I HAVE A 2022 KIA CARNIVAL LX 3.5 LTRS. I CAN'T FIGURE OUT HOW TO RESUME THE REMOTE START AFTER ENTERING THE VAN. IF I STEP ON THE BRAKE PEDAL , OR PUSH THE START / STOP BUTTON THE CAR SHUTS OFF. WHAT IS THE PROCEDURE TO MAINTAIN THE CAR ON AFTER USING THE REMOTE START?
I SOLVED MY ISSUE , IN REGARDS TO VEHICLE SHUTTING DOWN , WHEN ON REMOTE START MODE, WHEN YOU ENTER VEHICLE APPLY BRAKE PEDAL , AND SHIFT TO GEAR , FOWARD , OR REVERSE, TO DRIVE . ( DONT PUSH START/ STOP BUTTON AT ALL. ) WHEN YOU FINISH DRIVING APPLY EMERGENCY BRAKE AND JUST (PUSH START/ STOP BUTTON TO SHUTDOWN ENGINE . WHEN APPLYING EMERGENCY BRAKE YOU NEED TO APPLY BRAKE PEDAL. I HOPE THAT THIS INFORMATION TODAY WILL HELP THOSE WITH SIMILAR ISSUES. THANK YOU. 08/02/2021
Check with your dealer or Kia corporate. You could also try a different carnival to see if it works differently. If it does it’s a defect. If it doesn’t then it’s likely a difference in local law compared to mainland US.
THANK YOU FOR YOUR REPLY, I'M SURE THAT THE SMART REMOTE START IS WORKING PROPERLY. MY ISSUE WAS I WAS APPLYING THE BRAKE PEDAL AND PUSHING THE START/ STOP BUTTON CAUSING VEHICLE TO SHUT DOWN. IT'S WORKING PROPERLY NOW.. ONCE VEHICLE IS IN REMOTE START CYCLE , YOU CAN'T PUSH THE START / STOP BUTTON OTHERWISE THE VEHICLE WILL SHUT DOWN. THE RIGHT PROCEDURE IS , PUT BRAKE PEDAL DOWN , SHIFT IN GEAR , AND RELEASE EMERGENCY BRAKE, THEN THIS WILL RESUME THE REMOTE START CYCLE. THIS ISSUE WAS SOLVED BY MIKEY TODAY, I HOPE THIS MIGHT HELP ANYONE HAVING THIS ISSUE. 08/02/2021.